RAYMOND'S AUTO and TRUCK INC. BY ALIGNING VEHICLE DOES NOT GUARANTEE QUALITY OF OUTSIDE PARTS OR INSTALLATION OF SUCH PARTS. NO WARRANTY ON ALIGNMENT ISSUES DUE TO FAILED OUTSIDE PURCHASED PARTS OR FAULTY INSTALLATION OF OUTSIDE PURCHASED PARTS.
PASSENGER FRONT HUB BEARING IS NOISY
JIM K. gave our service a 5 star review on 3/30/2019
CHECK AND ADVISE BRAKES – REAR BRAKES WERE REPLACED RECENTLY – WAS TOLD FRONTS WAS NEEDED – CHECK FRONT BRAKES – NOT HEARING ANY NOISE –
TIE ROD and /OR END – Remove and Replace – Inner,Both – [Includes: R and I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing I
Replace front brake pad linings and front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
JENNIFER F. gave our service a 5 star review on 1/6/2018